- Clamp off battery lead from negative connection point.
- Remove side trim panel from footwell on right A-pillar.
- Release screw (1) and remove cover (2).
- Unlock the positive battery cable connector:
- Loosen lock (1) in direction of arrow.
- Unlock top positive battery cable connector (2) in direction of arrow.
- Disconnect battery positive lead (2).
- Unlock plug connections·(1) and disconnect.
- Release bolt (2) and remove control unit (3).
- Tightening torque 61 35 5AZ.
Installation note: Make sure all plug connections are correctly latched.