Skip to content

MINI COOPER CVT Adaptation

For adaptation of the CVT gearbox, the following steps must be carried out as instructed. If necessary, step "I" can also be carried out individually.

I.) Clutch Adaptation:

Press the brake pedal in the following steps.

1. Start the cold engine (engine must be cold for this procedure to work). At increased idle speed, shift to N for 10 seconds, then shift to D for 10 seconds.

XP is indicated in the P position in the display.

2. Repeat the following ten times: Shift to N for 3 seconds, then shift to D for 3 seconds.

XP is indicated in the P position in the display.

3. Repeat the following ten times: Shift to N for 3 seconds, then shift to R for      3 seconds.

XP is indicated in the P position in the display.

 

II.) Step-up ratio Adaptation:

1. Accelerate the vehicle to a speed > 80 km/h. Release the accelerator pedal and allow the vehicle to coast. The gearbox adapts itself for 4500, 4000... 1500 and 1400 rpm. P is indicated in the P position in the display.

2. The engine has now reached operating temperature. The idle speed is 800 rpm. Repeat step 2 and 3 of clutch adaptation.

3. Turn ignition lock to Position 0.