Skip to content

EWS Delete Instructions (EWS 3)

Please follow these instructions once you receive your DME back from us:

Step 1: Install the Unlocked DME in the vehicle


Step 2: Remove your EWS3 Unit and Insert a 30amp / 25amp / 20amp max! Fuse into Pin 1 & 2 into the EWS3 Female plug (See Picture Below). This bypasses the EWS Unit and will allow the engine to crank. Remember there is No way the fuse will not fit, if you are having trouble simply turn the plug around and it will go in.


Step 3: Start the car

EWS 3 Bypass